CMSIS-DAP - Probe not found 메시지
기술노트 69741
아키텍처:
ARM
컴포넌트:
debugger
업데이트:
2018-02-28 오전 1:56
Introduction
You get the error message: "Probe not found" when trying to use CMSIS-DAP.
Solutions
For any device
Download and install Microsoft Visual C++2010 SP1 Redistributable Package : Visual C++ 64-bit Windows Runtime or Visual C++ 32-bit Windows Runtime.
For mbed devices
- Download the mbed Windows driver.
- Download the mbed Interface Firmware.
For Freescale FREEDOM boards
Install the "Open SDA Debug Driver" from P&E Microcomputer Systems.
- Download the archive at
http://www.pemicro.com/downloads/download_file.cfm?download_id=378
Please note - you need to register at the P&E website in order to proceed with the download. - Put the Freedom board in bootloader mode.
- Copy the un-zipped DEBUG-APP-V100.SDA to the FREEDOM USB drive when in bootloader mode.
- Pull the plug on the board and replug it.
IAR Embedded Workbench for ARM version 7.10.1
If you are using IAR Embedded Workbench for ARM version 7.10.1, you need to install a "CMSIS-DAP driver fix" from My Pages > Product Updates.
All product names are trademarks or registered trademarks of their respective owners.