I-jet MIPI20 - ARM20 어댑터 연결

기술노트 36196

아키텍처:

ARM

컴포넌트:

debugger

업데이트:

2018-02-28 오전 1:53

Introduction

I-jet can not connect to target via MIPI20 - ARM20 adapter.

Possible solution

If the ARM20 connector on the target board is NOT keyed, you may need to connect the adapter "the other way around".

Background

One model of the MIPI20 - ARM20 adapter has misleading pin assignments.

  • Pin 1 of the MIPI20 connector is marked on the top side of the adapter PCB.
  • Pin 1 of the ARM20 connector is marked on the bottom side of the adapter PCB.

MIPI20 pin 1 and ARM20 pin 1 are in opposite corners:

Photo showing the adapter; bottom view (ARM20) to the left and top view (MIPI20) to the right.

Note

  • MIPI20 is the smaller connector
  • ARM20 is the bigger connector

 

All product names are trademarks or registered trademarks of their respective owners.

죄송하지만, 당사 사이트에서는 Internet Explorer를 지원하지 않습니다.보다 편안한 사이트를 위해 Chrome, Edge, Firefox 등과 같은 최신 브라우저를 사용해 주시길 부탁드립니다.