USB 장치 (동글 또는 JTAG)가 응답하지 않음

기술노트 67644

아키텍처:

All

컴포넌트:

IDE

업데이트:

2018-02-28 오전 2:36

Introduction

Sometimes a USB device (such as a dongle or JTAG) related to IAR Embedded Workbench does not respond. A typical situation when the USB system can become "shaken", is when a Microsoft Windows update has been installed.

First action

First of all try to trouble shoot according to the documentation/Technical Notes for the USB device in use.

Next action

  • Attach the USB device.
  • In the Device Manager uninstall this USB device.
  • Remove the USB device.
  • (Sometimes needed.) Restart the computer. Possibly you also need some (4-5) minutes of power down for the computer.
  • Attach the USB device and install the drivers when the Windows Wizard has started.

Third action

  • Unplug all USB devices, (keep mouse and keyboard).
  • Go into Control panel/system/device manager
  • Change presentation at menu View to 'Devices by connection' (See picture below.)
  • Attach the troublesome USB device.
  • Expand the list until you find the non-respronsive USB device. (See example in picture below.)
  • Uninstall at a higher level, i.e. the 'Standard universal PCI to...".´, is to be uninstalled (and later reinstalled by the Windows system).
  • Reboot.
  • Plug in the USB device and the Windows Wizard asks for the driver.
  • Install the driver.

Fourth action

  • Restart PC
  • Enter 'Safe Mode'
  • Check for (and remove) USB devices that might exist (and only show up in 'Safe Mode') as USB devices that have not been correctly un-plugged.

Actions beyond this Technical Note

  • If there are still USB problems, contact your local IAR support department, and request details on more to do.

Please Note

This Technical Note has been tested with the SuperPro USB dongle and J-Link ARM. The suggestions above might (or not) work for other USB devices used in conjuction with IAR Embedded Workbench.
For example the Atmel JTAGICE-mkII (IAR Embedded Workbench for AVR) and the PE-USB-BDM-probe (IAR Embedded Workbench for HCS12) uses a driver named 'Jungo' which might need other treatment. (At time of writing this has not been tested by IAR.)

 

All product names are trademarks or registered trademarks of their respective owners.

죄송하지만, 당사 사이트에서는 Internet Explorer를 지원하지 않습니다.보다 편안한 사이트를 위해 Chrome, Edge, Firefox 등과 같은 최신 브라우저를 사용해 주시길 부탁드립니다.