USB-병렬 포트 컨버터에 연결된 녹색 동글

기술노트 36690

아키텍처:

All

컴포넌트:

lms

업데이트:

2018-02-28 오전 2:43

Introduction

This text is applicable for products that uses Activator M hardware locks. (That is, small "dongles" that connects to a printer port. This type of dongle has a green plastic housing).

Note

The green dongle is not used in the current (supported) products. Green dongles were replaced by other dongles in 2001 (and onwards).

Issue

The driver does not find the green dongle.

Possible action

The green dongle is a quite simple parallel port device, so the settings for the driver (that drives the USB-to-Parallel port converter) can be tested to be:

  • Test to set the 'emulated' parallel port to different types of parallel port.
  • Try with different addresses for the 'emulated' parallel port. (The classical addresses are 0x378 and 0x278.)
  • And use the suggestions in the main Technical Note 98236.

Notes

  • We at IAR are interested to know if you can get a USB-to-Parallel port converter to work with a green dongle. If so, please inform us, so that we can improve this Technical Note.
  • The latest (made 1998) version of the driver is available in the Download driver link in Technical Note 98236.

All product names are trademarks or registered trademarks of their respective owners.

죄송하지만, 당사 사이트에서는 Internet Explorer를 지원하지 않습니다.보다 편안한 사이트를 위해 Chrome, Edge, Firefox 등과 같은 최신 브라우저를 사용해 주시길 부탁드립니다.