Get started with the Raspberry Pi Pico board

blog.jpg

Dec 29, 2021

We announced recently our support for the versatile Raspberry Pi Pico development board based on a dual-core Arm Cortex-M0+ processor. Now we've had the chance to try the Raspberry Pi Pico board together with IAR Embedded Workbench and I-jet

This video demonstrates the step-by-step on how to run an example out of the box on the popular Raspberry Pi Pico board directly from the IAR Embedded Workbench for Arm and explains the necessary IDE configurations, like MCU selection, linker file, and debug setup.

You will also see how to connect the 3-pin Arm Serial Wire Debug (SWD) port available on the Raspberry Pi Pico board to the I-jet probe to keep full control when debugging an application.

Finally, it will also show you how to debug externally build executables from Raspberry Pi Pico SDK on the Raspberry Pi Pico board with the IAR Embedded Workbench.

Watch video:

We do no longer support Internet Explorer. To get the best experience of iar.com, we recommend upgrading to a modern browser such as Chrome or Edge.