Atmel Xplained board and EDBG

Technical Note 40560

Targets:
ARM

Component:
Debugger

Updated:
2/3/2015 10:52 AM

Introduction

An Atmel Xplained board is not recognized by IAR Embedded Workbench for ARM.

Solution

Change the selection in...
Project > Options > Debugger > Setup > Driver
...to be CMSIS-DAP.

Then check (and possibly change) the settings in...
Project > Options > Debugger > CMSIS-DAP.

Background

The Atmel Xplained board(s) has an Atmel proprietary on-board debug probe named "Atmel Embedded Debugger (EDBG)". Atmel EDBG uses the CMSIS-DAP communication protocol.

 

All product names are trademarks or registered trademarks of their respective owners.

Related Tech Notes

© IAR Systems 1995-2016 - All rights reserved.