CMSIS-DAP - Probe not found

Technical Note 69741

Targets:
ARM

Component:
Debugger

Updated:
1/9/2015 8:14 AM

Introduction

You get the error message: "Probe not found" when trying to use CMSIS-DAP.

Solutions

For any device

Download and install Microsoft Visual C++2010 SP1 Redistributable Package : Visual C++ 64-bit Windows Runtime or Visual C++ 32-bit Windows Runtime.

For mbed devices

For Freescale FREEDOM boards

Install the "Open SDA Debug Driver" from P&E Microcomputer Systems.

  • Download the archive at
    http://www.pemicro.com/downloads/download_file.cfm?download_id=378
    Please note - you need to register at the P&E website in order to proceed with the download.
  • Put the Freedom board in bootloader mode.
  • Copy the un-zipped DEBUG-APP-V100.SDA to the FREEDOM USB drive when in bootloader mode.
  • Pull the plug on the board and replug it.

IAR Embedded Workbench for ARM version 7.10.1

If you are using IAR Embedded Workbench for ARM version 7.10.1, you need to install a "CMSIS-DAP driver fix" from My Pages > Product Updates

 

All product names are trademarks or registered trademarks of their respective owners.

Related Tech Notes

© IAR Systems 1995-2016 - All rights reserved.