FAQ
라이선스, 제품 업데이트, 평가판, 고객 정보 등록에 관한 자주 묻는 질문을 검색할 수 있습니다.
이 페이지에는 최신 라이선스 관리시스템(LMS2)의 License Manager 2.XX에 대응하는 제품에 관한 FAQ를 게재하고 있습니다.
질문에 대한 답변이 없다면 IAR 시스템즈 코리아 고객지원팀으로 편하게 문의하시기 바랍니다.
Stand-alone 라이선스
라이센스 유형 변경
라이센스 활성화 및 설치
- 컴퓨터가 인터넷에 연결되어 있지 않은 경우, 어떻게 라이선스를 활성화해야 하나요?
오프라인 액티베이션이라고 하는 기능을 사용해 활성화 할 수 있습니다.제품에 동봉되어 있는 「라이센스 가이드」에 자세한 설명이 게재되어 있으므로 참조하십시오.
- 여러 에디션의 IAR Embedded Workbench를 교체하여 사용할 수 있습니까?
네, 가능합니다.자세한 방법은 Technical Note 39232 를 참조하십시오.
- LMS1의 이전 버전과 LMS2의 새로운 버전을 함께 사용할 수 있나요?
네, LMS1과 LMS2 제품은 동일한 PC에 설치하여 하나의 라이센스 번호로 병행하여 사용할 수 있습니다.
- 라이선스 설치 방법을 알고 싶습니다.
설치 방법은, 인스톨 미디어, 및 인스톨 된 제품에 동봉 되어 있는 「인스톨과 라이센스의 퀵 레퍼런스」에 스텝 바이 스텝으로 기재되어 있기 때문에, 참조하십시오.
나의 IAR Embedded Workbench의 여러 다른 제품간 라이센스를 번갈아서 사용할 수 있습니까?
네 가능합니다. tech note 39232에 기술되어 있습니다.
Can I use an old LMS1-based version in parallel with my LMS2-based version?
Yes, LMS1-based and LMS2-based products can be installed on the same PC and use the same license number.
How do I install my license?
Installation instructions are provided in the “Installation and Licensing Quick Reference”, on the installation media and in the installed product.
Updates
버전 업데이트
- 최신 버전으로 업데이트하려면 어떻게 해야 하나요?
업데이트 방법은, 인스톨 미디어, 인스톨 된 제품에 동봉 되어 있는 「인스톨과 라이센스의 퀵 레퍼런스」에 자세하게 기재되어 있으므로, 참조하십시오.
- 새로운 버전의 라이선스(LMS2)를 구입했는데, 오래된 버전(LMS1)도 사용하고 싶습니다.어떻게 해야 합니까?
저희 고객지원팀로 연락주세요.사용하고 싶은 제품 버전용의 인스톨 키를 준비합니다.
- 기존 버전의 라이선스(LMS1)를 사용했지만, 새로운 버전(LMS2)도 사용하고 싶습니다.어떻게 해야 합니까?
새로운 LMS2 버전을 사용하려면 새 라이센스 키를 발급해야 합니다.유효한 보수 계약을 가지고 계신 경우는, 새로운 버전이 인스톨 되면, 새로운 라이센스 키가 자동적으로 발행됩니다.
- USB 동글타입의 새로운 라이선스를 구입했는데 USB동글을 받기 전에 사용할 수 있나요?
예, 라이선스를 PC에 임시로 locking을 할 수 있게 되어 있습니다.이 옵션은 라이선스 활성화 프로세스 중에 표시됩니다.단, 이 경우 동글을 받는 즉시 다시 라이선스를 유효화하여 동글로 locking 해야 합니다.
- 라이선스를 PC에 잠그고 있는데 PC가 고장났어요.어떻게 하면 좋을까요?
새 PC로 라이선스를 활성화하기 전에 가까운 고객관리로 연락하시기 바랍니다.
- 라이선스를 동글에 잠그고 있는데 동글이 고장/분실 되었습니다.어떻게 해야 합니까?
저희 고객지원팀으로 연락주세요.
I have bought a new license (LMS2) but I like to work with an older (LMS1) version. How can I do that?
Contact Customer Care in your region to obtain an installation key that is specific for the version of the product that you want to use.
I have been using an old LMS1 version, but I would like to work with a new (LMS2) version. How can I do that?
A new license key must be issued in order for you to use the new LMS2 version. The new key is automatically issued when the new version is installed, provided that your current license has a valid Support and Update Agreement associated with it.
I have bought a new license with a dongle, but I haven´t received the dongle. I need to start to work right away. Can I do that?
Yes, you can lock the license temporarily to the PC. This option will be presented to you during the Activate License process. You must make a new license activation when your dongle arrives.
I have a license locked to my PC and now my PC crashed. What do I do?
You must contact Customer Care in your region before you can activate the license on a new PC.
I have a license locked to a dongle and now my dongle is broken/lost. What do I do?
Contact Customer Care in your region.
라이센스 유형 변경
How can I change my license from standalone to network?
How can I change my license from network to standalone?
I have upgraded my license from limited to standard edition. What do I need to do?
When you have received an e-mail notification from IAR Systems start IAR License Manager, select License > Check for License Renewal, and follow the instructions.
I have a mobile license that I would like to lock to the PC. What do I need to do?
Contact Customer Care in your region.
How can I move between a time-limited and a size-limited evaluation version?
If your IAR Embedded Workbench product is using the new license management system (LMS2), you can easily move between a time-limited and a size-limited evaluation version without reinstalling the product, for more information see Technical Note 39232.
Dongles
I have bought a dongle to my license that used to be PC locked. What do I need to do?
When you have received an e-mail notification from IAR Systems start IAR License Manager, select License > Activate License, and follow the instructions.
My dongle has stopped working, or is lost. How do I solve that?
First you must contact Customer Care in your region. When you have received your new dongle, start IAR License Manager, select License > Activate License, and follow the instructions.
Can I work with a pool of dongles?
Yes, activate all dongles in the pool on all computers that will use them. The last dongle that was activated will be the selected one. If the IAR License Manager detects that the attached dongle does not match the selected license, a pop-up message appears and you will be asked if you want to use the license for the connected dongle instead. Just accept this offer.
Can I use the old IAR Visual State dongle (version 7.1 or below) with the new version 7.2 and up?
No, the old dongle will not be functional with the newer versions using a LMS2 licenses. If you have an old dongle and update IAR Visual State to version 7.2 or up, your license will automatically be transformed into a PC locked license (System UUID). If you prefer a dongle (cost free), contact CustomerCare.se@iar.com.
Can I lock my network license to my server by using a USB dongle?
Yes, IAR Embedded Workbench and IAR Visual State Premium network licenses can be connected to a USB dongle if your license is on an active SUA. Please reach out to Customer Care in your region.
IAR Build Tool network licenses can not be locked to a USB-dongle.
Network licenses
Activation, installation and updates
How do I install my network license?
Installation instructions are provided in the ”Installation and Licensing Quick Reference”, on the installation media and in the installed product.
How do I update to the latest version?
Update instructions are provided in the ”Installation and Licensing Quick Reference”, on the installation media and in the installed product.
Where can I find the server software and information about release updates?
On My Pages.
Servers
Can the IAR License Server software run on a virtual machine?
Yes. If you run into a problem, contact Customer Care in your region.
Can I use the same license server for both LMS1-based and LMS2-based products?
No, LMS1-based and LMS2-based products require different versions of the IAR License Server software.
Can the FLEXlm license server (used for IAR Visual State versions up to 7.1) and the LMS2 license server (used from version 7.2 of IAR Visual State) be installed on the same computer?
This should not be a problem. If you experience difficulties please send an e-mail to CustomerCare.SE@iar.com.
Can the LMS1 license server and the LMS2 license server be installed on the same computer?
No, different computers must be used. If you use virtual installations, they can be on the same physical computer. To lock your license to a hardware lock (dongle) on both PCs, you need an additional dongle. This additional dongle will be provided to you by IAR Systems without any additional cost. To order the additional dongle, send an e-mail to CustomerCare.SE@iar.com.
Users
How do I add users to an existing network license?
First you must contact Sales in your region. When you have received an email from IAR Systems notifying you that the updated license is available, open the IAR License Manager and perform a Check for License Renewal operation.
What can I do if my client PC cannot detect the server where the network license is installed?
It is possible to point out the network license server manually. For detailed instructions please see the “Licensing Guide”.
VPN and sub-networks
How can I make an LMS1 network server work globally with VPN and different sub-networks?
You must manually point out the server. From the IAR License Manager, choose License > Install and at the bottom of this dialog box specify the license server name.
How can I make an LMS2 network server work globally with VPN and different sub-networks?
You must manually point out the server. From the IAR License Manager, choose License > Use Network License to open the wizard and then click Add a server.
Check out
Is it possible to disable the “Check out” license functionality on a license server?
Yes, set the maximum number of commuter authorizations to be 0% of the total number of licenses, use the LSERVOPTS environment variable with the -com option on your license server computer: LSERVOPTS=-com 0.
LMS1
Older products in LMS1
How do I get a permanent key for my license?
If it's a new license, go to www.iar.com/register. If the license is already registered, you can find your key at My Pages.
How do I manually register my license?
Please go to www.iar.com/productregistration for detailed instructions.