IAR I-jet Trace for Arm Cortex-M

Arm Cortex-M을 위한 디버깅 및 추적 프로브로 IAR Embedded Workbench의 강력한 기능을 지원합니다.

01

광범위한 디버깅

통합 툴은 개발 워크플로우를 간소화합니다. 기능이 풍부한 회로 내 추적 디버깅 프로브는 IAR Embedded Workbench for ARM의 강력한 기능을 가능하게 합니다. ETM(Embedded Trace Macrocell)을 지원함으로써 타임라인에 있는 애플리케이션의 호출 스택 그래프 외에도 코드 적용 범위 및 프로파일링을 완벽하게 수행할 수 있습니다.

02

최고성능

Arm Cortex-M 용 디버깅 및 추적 프로브를 통해 IAR Embedded Workbench에서 강력한 기능을 사용할 수 있습니다.

03

Arm Cortex-M 장치에 대한 광범위한 지원

자동 코어 인식 및 JTAG / SWD 감지를 통해 모든 실리콘 공급 업체의 모든 Arm Cortex-M 코어를 지원합니다. ETM (Embedded Trace Macrocell) 추적을 완벽하게 지원합니다.

04

광범위한 추적 기능

Arm Cortex-M 용 I-jet Trace에는 프로브에서 C-SPY 디버거로의 데이터 전송시 5Gbps에 이르는 SuperSpeed ​​USB 3.0 인터페이스가 장착되어 있습니다. 프로브는 64MB 또는 256MB로 제공되어 다양한 추적 메모리 크기 요구 사항을 충족합니다. 트레이스 데이터 수집은 150MHz ETM 트레이스 클럭과 CPU 사이클 정확도가있는 64 비트 타임 스탬프가있는 1,2 및 4 비트로 수행 할 수 있습니다. 포함 된 스트리밍 추적 기능을 통해 무한 코드 커버리지 및 프로파일 링이 활성화됩니다.

상세정보 및 프로브 비교

사양

General

       I-jet      I-jet Trace CM L I-jet Trace CM XL I-jet Trace Arm
USB connection High Speed USB 2.0 SuperSpeed USB 3.0 SuperSpeed USB 3.0 SuperSpeed USB 3.0
USB speed 480 Mbps 5 Gbps 5 Gbps 5 Gbps
Powered through USB  ✔  ✔  ✔  ✔
Maximum target power (5V) supplied  400 mA  400 mA  400 mA  600 mA
First supporting version of IAR
Embedded Workbench for Arm
6.30.8 7.30.3 7.80.1 7.70.1
  Buy online Buy online Buy online Buy online

Included adapters

       I-jet      I-jet Trace CM L I-jet Trace CM XL I-jet Trace Arm
MIPI-10
MIPI-20
ARM-20
Mictor-38      
         

Optional adapters

  I-jet I-jet Trace CM L I-jet Trace CM XL I-jet Trace Arm 
MIPI-20 to TI-14 Available Available Available Available
MIPI-20 to cTI-20 Available Available Available Available
MIPI-20 Isolated (ETM not supported) Available Available Available Available
MIPI-20 to Mictor-38 Available Available Available Native support
Mictor-38 to MIPI-60 Available Available Available Available
I-scope Available Available Available Available
         

Core support

       I-jet      I-jet Trace CM L I-jet Trace CM XL I-jet Trace Arm
Arm7/Arm9/Arm11 ✔ (no ETM trace) ✔ (no ETM trace) ✔ (no ETM trace)
Arm Cortex-M
Arm Cortex-R ✔ (1/2/4 bit ETM trace only) ✔ (1/2/4 bit ETM trace only)
Arm Cortex-A ✔ (1/2/4 bit ETM trace only) ✔ (1/2/4 bit ETM trace only)
         

Interfaces

  I-jet I-jet Trace CM L I-jet Trace CM XL I-jet Trace Arm
JTAG
SWD
cJTAG
SWO UART/Manchester encoding
Target debug I/O voltages supported 1.65V to 5.5V 1.2V to 5V 1.2V to 5V 1.2V to 5V
         

Trace features

       I-jet      I-jet Trace CM L I-jet Trace CM XL I-jet Trace Arm
ETM trace buffer   64 MB 256 MB 256 MB
Trace data collection   1,2, and 4-bit 1,2, and 4-bit 1,2,4,8 and 16-bit
Maximum ETM trace clock   150 MHz 150 MHz 350 MHz
Maximum ETM bandwidth   1.2 Gbps 1.2 Gbps 11.2 Gbps
Automatic clock/data skew adjustment  
Automatic clock/data threshold adjustment      
ETB/MTB Trace support
         

Performance

  I-jet I-jet Trace CM L I-jet Trace CM XL I-jet Trace Arm
JTAG/SWD speed 48 MHz 100 MHz 100 MHz 100 MHz
SWO sampling frequency 96 MHz 200 MHz 200 MHz 200 MHz
SWO max. bandwidth ~30 Mbps ~60 Mbps ~60 Mbps ~60 Mbps
Download speed (RAM) 1.89 MByte/s 3.73MByte/s 3.73 MByte/s 3.73 MByte/s
Power sampling resolution ~160 µA ~160µA ~160 µA ~160 µA
Power sampling rate 200 ksps 200 ksps 200 ksps 200 ksps
         

Functionality

  I-jet I-jet Trace CM L I-jet Trace CM XL I-jet Trace for Arm
Automatic core recognition
Code breakpoints
Data breakpoints
Flash breakpoints
Interrupt logging
Data logging
Call stack trace With ETB
Cycle counter (For Cortex-M devices)
Code coverage Sampled/Full with ETB/MTB Full Full Full
Function profiling Sampled/Full with ETB/MTB Full Full Full
Instruction trace Limited with ETB/MTB Full Full Full
         

이 제품에 대해 자세히 알고 싶으십니까?

우리는 여러분을 돕기 위해 전 세계에 위치하고 있으며, 우리 제품에 대한 질문에 항상 답변 드립니다.

견적 문의

개발 프로젝트에서 이 제품을 사용하고 싶습니까? 당사 영업팀이 귀사에 적합한 솔루션을 안내해 드립니다. 이 양식을 작성하시면 귀하의 필요에 맞는 가격 견적을 보내드립니다. 귀하의 요청을 기다리겠습니다!

추가정보

CE and RoHS compliance

Our debug probes I-jet, I-jet Trace and I-scope are in compliance with:

CE: EMC Directive 2014/30/EU on the following test standards for IT product:
EN 55022:2010/AC:2011, EN 61000-3-2:2014 & EN 61000-3-3:2013
EN 55024: 201++A1:2015

CE: RoHS 3 Directive (EU) 2011/65/EU of the European Parliament and of the Council of 8 June 2011 on the restriction of the use of certain hazardous substances  in electrical and electronic equipment, including all applicable amendments—Directive (EU) 2015/863

FCC: the requirements of 47 CFR Part 15 regulation & ANSI C63.4 for the evaluation of Class A of electromagnetic compatibility.

Regulation (EC) No 1907/2006 of the European Parliament and of the Council of 18 December 2006 concerning the Registration, Evaluation, Authorization and Restriction of Chemicals (REACH).

Regulation (EC) No 850/2004, (EU) No 519/2012 of the European Parliament and of the Council on Persistent Organic Pollutants (POPs )

US provision to the Wall Street Reform and Consumer Protection Act (ref: Dodd-Frank Act 1502 on conflict minerals)

SJ/T 11363-2006 for Management Methods for Controlling Pollution by Electronic Information Products (China RoHS)

Directive 2012/19/EU of the European Parliament and of the Council of 4 July 2012 on Waste Electrical & Electronic Equipment (WEEE)

We keep working together with our partners and suppliers to fulfill our responsibility to ensure our are products in compliance with the above directives, regulations and requirements.

Connectors and adapters

I-jet and I-jet Trace has a MIPI-20 connector on the front panel and come with MIPI-20 and MIPI-10 cables. For I-jet Trace, only the MIPI-20 cable supports the ETM trace functionality, and MIPI-10 is for plain JTAG/SWD/SWO debugging. For details on the connectors, see the user manual.

In addition, the following adapters are available from IAR to fit different target connectors:

ADA-MIPI20-ISO Adapter adapter_mipi20_iso.jpg
ADA-MIPI20-ARM20  

ADA-MIPI20-RISCV12

 

ADA-MIPI20-RISCV24

 

 

죄송하지만, 당사 사이트에서는 Internet Explorer를 지원하지 않습니다.보다 편안한 사이트를 위해 Chrome, Edge, Firefox 등과 같은 최신 브라우저를 사용해 주시길 부탁드립니다.