I-jet MIPI20 - ARM20 adapter connection

Technical Note 36196

Arkitekturer:

ARM

Komponent:

debugger

Uppdaterad:

2015-11-06 10:40

Introduction

I-jet can not connect to target via MIPI20 - ARM20 adapter.

Possible solution

If the ARM20 connector on the target board is NOT keyed, you may need to connect the adapter "the other way around".

Background

One model of the MIPI20 - ARM20 adapter has misleading pin assignments.

  • Pin 1 of the MIPI20 connector is marked on the top side of the adapter PCB.
  • Pin 1 of the ARM20 connector is marked on the bottom side of the adapter PCB.

MIPI20 pin 1 and ARM20 pin 1 are in opposite corners:

Photo showing the adapter; bottom view (ARM20) to the left and top view (MIPI20) to the right.

Note

  • MIPI20 is the smaller connector
  • ARM20 is the bigger connector

 

All product names are trademarks or registered trademarks of their respective owners.

Det här innehållet finns tyvärr inte på svenska.

Vår webbplats finns främst på vårt koncernspråk engelska, förutom det innehåll för investerare som vi är lagstadgade att kommunicera på svenska. Vi rekommenderar att du besöker vår globala webbplats på engelska för att få en bättre upplevelse.

Vi stöder inte längre Internet Explorer. För att få bästa möjliga upplevelse av iar.com rekommenderar vi att du uppgraderar till en modern webbläsare som Chrome eller Edge.