Registration and HTTPS communication
Technical Note 95430
Architectures:
All
Component:
lms
Updated:
11/6/2015 10:38 AM
Introduction
The following error is shown when the registration of IAR Embedded Workbench is performed:
SOAP_HTTP_ERROR
Background
The license tools tries to communicate using SOAP over HTTPS (port 443) and this fails.
Solution
Try to do an Offline Activation, see instructions in the Licensing Guide.
<installation directory>\common\doc\EW_LicensingGuide_LMS2.ENU.pdf
Applies to
This information applies to customers using the 'IAR License Server Tools' to share licenses over a network.
This Technical Note applies to you, if you are using any of the following product(s) with the mentioned versions (or later).
Product | Version | Product | Version | Product | Version | Product | Version |
8051 | 8.11 | V850 | 3.81 | RL78 | 1.20 | RX | 2.40 |
430 | 5.51 | R32C | 1.40 | 78K | 4.80 | ARM | 6.50 |
AVR | 6.20 | STM8 | 1.40 | RH850 | 1.10 | CR16C | 3.20 |
M16C | 3.60 | AVR32 | 4.20 | SH | 2.30 | visualSTATE | 7.2 |
HCS12 | 4.10 |
All product names are trademarks or registered trademarks of their respective owners.